I. Method of fixed construction of stacking type
1. Laminated lining refractory ceramic fiber blanket should be cut neatly according to the planned scale.
2, for each tie of refractory fiber should be pre – shrinkage, its shrinkage should be the same, the rate of shrinkage should be 15%~20%.
3, through the string of fixed support plate and fixed pin, should be firmly welded, and check the welding quality root by root. The wall support plate should be horizontal and the pin should be straight. The center distance of pin should be 250~300mm.
4. When fixed with pin, the compressed ceramic fiber blanket should be inserted into the reservation position to the layer support plate. The movable pin shall be inserted straight into the refractory fiber blanket in the direction required by the plan, and shall not be deflected or lost.
5. After fixed with pin, the ceramic fiber blanket should be close to the inner layer. All ceramic fiber blanket joints should be tight.
Ii. Construction method of the sticker type fixed installation
1, paste the construction of ceramic fiber blanket, can use a straight a way to put.
2, before the construction with paste method, should be posted on the surface, according to the size of each tie grid line, in order to ensure that the refractory fiber blanket straight and tight.
3, in the burner, smoke exhaust mouth, holes and other parts of the ceramic fiber blanket should be cut into the corresponding strip or block (to facilitate the construction as a criterion), the direction of its placement to its surrounding straight.
4. When the planning requires that the ceramic fiber blanket needs a steel mesh, the steel mesh should be firmly spot welded on the furnace shell. The steel plate net should be flat and the thickness of the steel plate net should be 1~1.5mm.
5. Paste construction should be carried out from top to bottom. When the construction from the bottom to the top, do not drop the binder on the ceramic fiber blanket has been pasted.
6, paste method of bonding ceramic fiber blanket, binder should be daubed evenly, plump. After the refractory felt is coated with the binder, it should be immediately placed in the desired position and compressed with a wooden trowel to make it stick firmly. When pasted and pressed, do not push the adjacent ceramic fiber blanket that has been pasted, in case the ceramic fiber blanket that has been glued is damaged and cannot be used.
For more details or questions, please call the company hotline +0531 85800088 or through the online customer service website, you can also leave your contact information, we have professional technical personnel at any time for you to solve problems related to high temperature materials.
SHANDONG REDON HIGH-TEMPERATURE MATERIAL Co. ,LTD. has the domestic advanced production equipment and leading production technology, with an annual output of 1050 ceramic fiber series products, 1260 ceramic fiber series products, 1400 ceramic fiber series products, 1600 polycrystalline series products tens of thousands of tons. With cotton, blankets, blanket, board, paper and all kinds of textiles, special-shaped products, modules, folding, castable, spraying, etc. Various forms of more than 30 kinds of products, can meet the insulation requirements of high temperature field under different conditions, welcome to have a friend need to click the website lower right online customer service or submit online enquiry, we will contact you the first time.