1. After the completion of aluminum silicate masonry, stop the appearance finishing. The uneven areas shall be flattened with pressing plate, and the large gaps shall be cut and trimmed with ceramic fibreboard tiles to make the appearance smooth and tight.
2. The lining thickness of ceramic fibreboard brick must meet the requirements.
3. The thickness measurement after measuring the length, width, position as shown on the nine measurement points, quietly disc type thickness gauge needle flat on the sample, make the disc hole alignment measurement points, and the cursor tip downwards, beware of insert disc hole, when the tip contact sample, gently press the cursor, make needlepoint read thickness after touching the glass sample.
4. The Al2O3 content of ceramic fiber-board brick is not less than 45%.
5. Before laying ceramic fibreboard brick, the test row shall be stopped, the separation layer shall be bonded and the cracks shall be staggered.
For more details or questions, please call the company hotline +0531 85800088 or through the online customer service website, you can also leave your contact information, we have professional technical personnel at any time for you to solve problems related to high temperature materials.
SHANDONG REDON HIGH-TEMPERATURE MATERIAL Co. ,LTD. has the domestic advanced production equipment and leading production technology, with an annual output of 1050 ceramic fiber series products, 1260 ceramic fiber series products, 1400 ceramic fiber series products, 1600 polycrystalline series products tens of thousands of tons. With cotton, blankets, blanket, board, paper and all kinds of textiles, special-shaped products, modules, folding, castable, spraying, etc. Various forms of more than 30 kinds of products, can meet the insulation requirements of high temperature field under different conditions, welcome to have a friend need to click the website lower right online customer service or submit online enquiry, we will contact you the first time.