According to different molding methods, ceramic fiber modules can be divided into folding blocks, slicing blocks, Palo blocks, and vacuum forming blocks. Due to the different manufacturing methods of polycrystalline mullite fiber and its crystal structure, the fiber length is short and the flexibility is poor, so it cannot be made into a large module, resulting in the large-scale application of polycrystalline fiber. Now polycrystalline mullite fiber is mostly used in castables or refractory brick furnace wall, the inner surface of the furnace roof patch, the use of polycrystalline fiber patch can effectively reduce the temperature of the outer wall of the furnace and reduce the heat storage loss of the furnace wall.
At present, domestic ceramic fiber manufacturers mostly produce ceramic fiber folding blocks. Fold with a needle-punched blanket first, and use mechanical equipment to pre-compress the ceramic fiber module during molding. Its manufacturing method causes uneven surface to affect the spraying effect of anti-scouring paint. The sliced block is improved on the basis of the ceramic fiber folded block, and its manufacturing method is to cut the folded place after the folded block is formed to make the cut surface flat.
Shandong Red0n High-Temperature Materials Co., Ltd. has domestically advanced production equipment and leading production technology, with an annual output of 10,000 tons of ceramic fiber products, 1260 ceramic fiber products, 1400 ceramic fiber products, and 1600 polycrystalline products. There are more than 30 kinds of products in different forms such as cotton, blanket, felt, board, paper, various textiles, shaped products, modules, folding blocks, casting materials, spraying, etc., which can meet the thermal insulation requirements in different situations in the high temperature field, welcome If you need a friend, click online customer service at the bottom right of the website or submit an online inquiry form, and we will contact you as soon as possible.